To work with F6FBB bbs software.
If PortMapper is already running left click on the PortMapper icon on the task bar.
Then click on 'Configure'
Next click on Configure Mapping under Port Redirection:
If you've never use PortMapper the Configure Mapping window will be blank.
Click on the 'Add' button
For the 'Enter Port' information use a port that is not used by any other service (My bbs uses port 6300 for its normal telnet forwarding). This is the port you want PortMapper to listen on.
Port 6307 is where PortMapper will be listening
The 'target' is the bbs IP address (like 10.0.0.1) or the URL of the bbs you would like to connect to. i.e. gb7yks.d2g.com
If the bbs your going to connect to is listening on a certain port (normally 23 is the telnet port) enter that port information after the target address (i.e.. :6300) (example: gb7yks.d2g.com:6300).
You can leave the 'Protocol' and 'Interface' as is.
Click 'ok'
Click 'Done',
Click 'Done'
Now to configure the forwarding file for this station.
*************************
* TELNET TCP/IP FORWARD
* 6/17/02
*************************
A GB7YKS
P A
R
N 15
J 0
C C GB7YKS 127.0.0.1 6307
this is your localhost address, this is the port you want to connect to
All
V .your_callsign$Wyour_password$W
F GB7YKS
B GB7YKS
G WW*
----------